Fibaro smoke sensor mäter minimala 65x28 mm och smälter in snyggt och diskret i vilken miljö som helst. Under det minimalistiska höljet döljer sig en värld av smarta funktioner.
Det ska tilläggas att Fibaro smoke sensor fungerar som en vanlig rökdetektor helt "stand alone", ansluter du den dessutom till Fibaro Home Center 2 alt. Fibaro Home Center lite kan du själv definiera vad som ska ske när sensorn larmar. Ska all hemmets belysning tändas upp för att underlätta utrymmning eller ska alla anslutna användare meddelas via ett pushmeddelande? Om man har ett integrerat larm så kan larmets siren börja tjuta, på det sättet blir grannarna varse om att det skett något och kan då larma brandkåren om inte ni själva skulle kunna.
Självfallet krävs det att belysning mm. är ansluten till Fibaro Home Center 2 alt. Fibaro Home Center lite för att dessa funktioner ska kunna uppnås.



Fibaro Smoke Sensor is a universal, Z-Wave compatible, optical smoke detector. The device can be battery (battery life approx. 3 years) or alternatively VDC powered (12 or 24 VDC).
Smoke alarm is signaled by sound, LED diode blinking and through operating commands sent to the Z-Wave network devices. Additionally, smoke alarm may be sent to an alarm system or fire alarm system hub, through a NC contact terminals opening. Optical detector allows for detecting smoke at an early stage of fire, often before flames appear and temperature starts to rise significantly. Moreover the device has a built-in temperature sensor, which can also trigger the alarm once the specified temperature threshold is exceeded. Fibaro Smoke Sensor is designed to be placed on a wall or ceiling. LED signaling diode signals fire, operating mode and may serve as the Z-Wave network range controller. Sensor is designed to operate in confined spaces, under normal conditions (lacking smoke, dust, condensed water vapor).

Product Highlights:
• Unique design, assuring detection of even the smallest amount of smoke
• Detects smoke presence or rapid temperature changes
• Battery or VDC powered
• Communicates with a Z-Wave network or a wired alarm system
• Features wireless software update.

Technical Data:
• Power Supply: 12 - 24 VDC
• Battery Type: CR123A
• Power Consumption (at VDC operation): 0,4W
• Output terminals maximum current carrying capacity (ALARM NC, TAMP NC): 25mA
• Maximum voltage at output terminals: 24V (AC or DC)
• EU standards compliance: EMC 2004/108/EC, R&TTE 199/5/WE
• Radio protocol: Z-Wave
• Radio frequency: 868,4 MHz EU; 908,4 MHz US; 921,4 MHz ANZ; 869,2 MHz RU
• Range: up to 50m outdoors up to 30m indoors (depending on terrain and building structure)
• Operational Temperature: 0oC - 40oC
• Measured temperature range: -20oC - 100oC
• Temperature measuring accuracy: 0,5oC (within 0oC- 40oC range)
• Dimensions (Diameter x Height): 65 mm x 28 mm

Art.nr FGSS-001

Specifikation